LuxPro PSPA722 Programmable (7 day) Multistage Thermostat

LuxPro PSPA722 Programmable (7 day) Multistage Thermostat

COMPATIBLE WITH:
- Up to 2 Stage Heat / 2 Stage Cool Gas, Oil or Electric Systems
- 1 Stage Heat /1 Stage Cool Heating and Air Conditioning Systems, Gas, Oil, Electric or Heat Pump
- Low Voltage (24 Volt) Systems
- 2 Wire Hydronic Systems
- Single Stage Heat Pumps

NOT COMPATIBLE WITH:
- 3 Wire Hydronic System
- Line Voltage System (without transformer)

FEATURES: 

Autochangeover 
Fully Programmable IAQ Clean Cycle® Intermittent Fan
Programmable Auto Changeover
Dead-Band (1°F to 6°F)
7 Day Programming - 4 Periods Per Day
Easy Programming with Lux Speed Dial
Dual Power - System or Battery Powered with
Battery Free Memory Storage
Programmable Filter Timer with Change Filter Indicator
Temporary Override is CAT24 Compliant
Vacation Override
Adjustable 2 or 5 Minute A/C Compressor Delay
Energy Usage Monitor
EL (Electro Luminescent) Back Light Display
Mode and Fan Slide Switch
Optional Early Recovery
Energy Star Compliant
Batteries Included
1-Year Warranty
F/C Selectable
12/24 Hr Clock
Temperature Calibration
Multi-Stage Adjustable Temperature
Differential/Cycle Rate (.25 - 2.25)
Programming Copy Button
Keyboard Lockout
Speed Dial® Reprogramming
High Efficiency Systems
Contractor Grade
On-Screen Low Battery Indicator
Soft Touch Buttons
Default Energy Star Approved Program
Separate Temperature for Heating & Cooling
Hold Constant Temperature Override
Audible Keypad Entry Response

DIMENSIONS:
5.90" (150mm) wide x 4.13" (105mm) tall x 1.18" (30mm) deep

SPECIFICATIONS:
Heat/Cool Terminals: RH, RC, O, B, W1, W2, Y1, Y2, G,
Electrical Ratings: 11/2 AMPS at each terminal, 2 AMPS total
Powered: 2 "AA" Batteries .
Temperature Control Range: 45°F to 90°F (7° to 32°C).
Operating Humidity: 20% to 90% non-condensing.
Operating Temperature: +32°F to +122°F (+0°C to +50°C).
Storage Temperature: -4°F to +140°F (-20°C to +60°C).
Electrical Immunity: meets relevant CE specifications.