Proliphix PTS-OS3 Standard Outdoor Thermal Sensor
About This Product
Durable plastic enclosure (NEMA 3R)
+/-0.5oF (0.28oC) accuracy
The PTS-OS3 can be used for outside air temperature sensing. The design allows for two-point mounting and 1.5in wall separation for more accurate performance. The weather shield protects the stainless steel probe from the effects of rain, sleet, and snow.
Sensing Element Thermistor (thermal resistor)
Accuracy +/-0.5oF (0.28oC)
Temp Range -30oF to 230oF (34 to 110oC)
Temp Response NTC -Thermistor
Thermistor Stability 0.24oF (0.13oC) over 5 years
Connection 18" (46cm) 24 AWG pigtails
Mounting Directly to wall
Probe 304 Stainless Steel
Enclosure Plastic, NEMA 3R
Reviewed by 1 customer
Displaying review 1
Comments about Proliphix PTS-OS3 Standard Outdoor Thermal Sensor:
Attaches well to side of home using 2 (not included) screws. I soldered leads to wire from thermostat.
It is much larger than I imagined and is not discreet. This was OK for my usage, but may not suit everyone. Take a look at the dimensions before purchasing.
It is 3 degrees off with my wiring setup. Proliphix allows an offset which I used.