ProThermostats.com > Totaline P374-2300FM Programmable (7 days) MultiStage (2 Heat/2 Cool) Thermostat, Flush Mount
Totaline P374-2300FM Programmable (7 days) MultiStage (2 Heat/2 Cool) Thermostat, Flush Mount
Totaline P374-2300FM Programmable (7 days) MultiStage (2 Heat/2 Cool) Thermostat, Flush Mount
About This Thermostat
| MFG: | Totaline |
| MFG#: | P374-2300FM |
| Our#: | 101585 |
| Programmable: | Yes (NULL) |
| System Compatibility: | Multi-Stage |
| Power Options: | Power-Stealing |
| Heat/Cool Changeover: | Automatic or Manual |
| Programmable Fan: | Yes |
| Temperature Limits: | No |
| Keypad Lockout: | Yes |
| Backlight: | Yes |
| Vacation Hold: | No |
Features:
-Auto Changeover, 2-Stage Heat/Cool for use with gas/electric, electric and hydronic heat
-Dual-Setpoint with adjustable deadband, setpoint adjustment range from 35° - 99°F, switchable to °C
-7 Day Programmable with up to 4 Time Periods per day, with copy command for easy programming
-3 Security Levels with setpoint limiting, mode operation locking and setpoint locking
-4 Hour Setback Override Timer adjustable in 30 min. increments
-Soft Start - up to 100 units can be started in sequence form a single remote contact closure with no two units starting up simultaneously - up to 50% of the units can be programmed to start outside a 15 minute window for limiting demand
-Pre-Occupancy Purge - fan runs before programmed occupancy time, adjustable 0 to 3 hours
-Energy Saving Smart Fan - With the fan on continuously, fan runs only in occupied periods or when the system calls for heating or cooling in unoccupied periods
-Thermostat Locking - Setpoints can only be adjusted by authorized individuals if this feature is on
-Thermoglow Continuously Lit Electro-luminous Display
-Maintains temperature to within 1° of set point
-No batteries required, stat retains correct time for up to 48 hours in case of power failure
-All programming and setpoints stored in non- volatile memory, and are never lost in power failure
-Service filter indicator (adjustable 0 to 1950 hours)
-Red/Green LED shows whether thermostat is calling for Heating or Cooling
-5 minute compressor time guard and adjustable cycle limit, both overrideable for servicing equipment
-On board dry contact closure available to force stat into occupied operation
-Optional tamper-proof remote room sensor with push-button override available
-Optional wireless remote room sensor, can average up to 16 sensors available
-Optional duct sensor available
-Auto Changeover, 2-Stage Heat/Cool for use with gas/electric, electric and hydronic heat
-Dual-Setpoint with adjustable deadband, setpoint adjustment range from 35° - 99°F, switchable to °C
-7 Day Programmable with up to 4 Time Periods per day, with copy command for easy programming
-3 Security Levels with setpoint limiting, mode operation locking and setpoint locking
-4 Hour Setback Override Timer adjustable in 30 min. increments
-Soft Start - up to 100 units can be started in sequence form a single remote contact closure with no two units starting up simultaneously - up to 50% of the units can be programmed to start outside a 15 minute window for limiting demand
-Pre-Occupancy Purge - fan runs before programmed occupancy time, adjustable 0 to 3 hours
-Energy Saving Smart Fan - With the fan on continuously, fan runs only in occupied periods or when the system calls for heating or cooling in unoccupied periods
-Thermostat Locking - Setpoints can only be adjusted by authorized individuals if this feature is on
-Thermoglow Continuously Lit Electro-luminous Display
-Maintains temperature to within 1° of set point
-No batteries required, stat retains correct time for up to 48 hours in case of power failure
-All programming and setpoints stored in non- volatile memory, and are never lost in power failure
-Service filter indicator (adjustable 0 to 1950 hours)
-Red/Green LED shows whether thermostat is calling for Heating or Cooling
-5 minute compressor time guard and adjustable cycle limit, both overrideable for servicing equipment
-On board dry contact closure available to force stat into occupied operation
-Optional tamper-proof remote room sensor with push-button override available
-Optional wireless remote room sensor, can average up to 16 sensors available
-Optional duct sensor available
