White-Rodgers 1F98EZ-1621 Wireless Thermostat System
About This Thermostat
|Programmable:||Yes (7-day or non-programmable)|
|Stages:||4H & 2C|
|System Compatibility:||Single Stage, Multi-Stage, Heat Pump|
|Power Options:||24 VAC Hardwire|
|Heat/Cool Changeover:||Automatic or Manual|
White-Rodgers 1F98EZ-1621 Wireless Programmable Thermostat System
This innovative system takes advantage of the latest wireless technology and allows for the location of a thermostat where wires are difficult or impossible to run. The system consists of:
1). 6" Comfort Interface (Thermostat) which runs on batteries
2). Equipment Control Module, which is powered by 24V system transformer and wires to HVAC equipment
3). Return Air Sensor (RAS) - The RAS monitors temperature of the return air and is needed at all times for system operation
- Universal - compatible with single and multi-stage, heat pump and heat pump with dual fuel applications
- Premium Humidity Control
- Easy-to-Read 6" Display on Comfort Interface
- Ideal where pulling wires is difficult and additional temperature sensing is desired.
- Color-coded LEDs on Equipment Control validates system wiring.
- Comfort Interface and Equipment Control are paired at the factory - nothing to configure.
- Wireless Sensor (F145RF-1600) is configurable for indoor or outdoor use. The thermostat displays the average of the local sensor and any indoor remote
sensors unless a device has been deactivated. The local sensor can be disabled so that only remote sensor values are used for control.
- Easily Reduces Hot and Cold Spots in the Home
- Comfort Interface and up to 3 wireless temperature sensors can be located in optimum control locations.
- Maximizes Comfort with Premium Humidity Control
- Set and control humidification and dehumidification right at the Comfort Interface.
- Optimizes Efficiency on Heat Pump Systems with Dual Fuel Control
- Choice of dual fuel control with wireless temperature sensor or by Dual Fuel Logic program in Comfort Interface.
- Choice of 7 day or Ø day/non-programmable (installer selectable)
- Choice of 4 or 2 program periods per dayPermanent program retention during power loss
- Indefinite setpoint Hold or temporary temperature override
- Auto heat/cool changeover option - automatically switches between heating and cooling programs
- Heating and cooling, heating only or cooling only configuration
- Setpoint temperature limits
- Furnace filter change reminder
- Humidifier pad change reminder
- Maintains room temperature to within +/- 1° F
- Room temperature display can be recalibrated up to +/- 5° F
Dimensions: 6.5"W x 4.3"H x 1.2"D - comfort interface / 6.5"W x 6.4"H x 1.4"D - equipment control module
Setpoint Temperature Range: 45° to 99° F (7° to 32° C)
Rated Differential: Heat 0.6° F; Cool 1.2° F
Operating Ambient Temperature: 1F98EZ-1621
14° to 131° F (-10° to 55° C) - comfort interface
-13° to 158° F (-25° to 70° C) - equipment control
Operating Humidity Range: 5-90% non-condensing maximum
Applications - Standard Systems, Single Stage gas, oil, electric, Single Stage heat pump, Multi-Stage gas, oil, electric, Multi-Stage heat pump
TERMINALS: R, Rc, Rh, C, W/E, Y, Y2, G, O/B, L, HM, HM2, DHM, DHM2