> LuxPro PSD122E Non-Programmable Universal Thermostat

LuxPro PSD122E Non-Programmable Universal Thermostat

LuxPro PSD122E Non-Programmable Universal Thermostat

About This Thermostat

MFG: LuxPro
Our#: 101616
Programmable: No
Stages: 2H & 2C
System Compatibility: Multi-Stage, Millivolt, Single Stage, Heat Pump
Power Options: Battery, 24 VAC Hardwire
Heat/Cool Changeover: Automatic or Manual
Programmable Fan: Yes
Temperature Limits: No
Keypad Lockout: Yes
Backlight: Yes
Vacation Hold: No

LuxPro PSD122E Non-Programmable Thermostat

Universally compatible Everything'Stat® offers digital control of single or
multistage heating and cooling systems. Temperature control adjustable.

Your PSD122E is compatible with most 24 volt gas, oil, or electrical Heating and/or Cooling systems. It cannot be used with 120 volt heating systems.

The PSD122E is capable of controlling systems with up to two stages of heat in furnace mode. In heat pump mode, the thermostat can be configured to control up to two stages of compressor driven heat plus auxiliary and emergency heat stages.

-Universal compatibility
-Controls up to 2 stages of heat and 2 stages of cooling plus auxiliary and emergency heat
-Auto changeover
-Large hybrid display
-Auxiliary and emergency heat indicators
-Electro-luminescent display backlight
-IAQ intermittent fan
-F/C temperature display
-Nonvolatile memory for all settings
-Multimode keyboard lockout with user programmable 3 digit code
-Programmable high and low setting limits
-Defeatable audible button response
-Menu driven setup done from the front panel
-Temperature offset (user calibration)
-Dual power capable (system/batter)
-Multi-stage adjustable temperature differential/cycle rate
-Programmable length minimum run time
-Programmable auto-changeover dead-band
-Programmable fan delays for heat, cool, in both on and off

- Most 24v Gas, Oil, Electric Heating and Air Conditioning Systems
- Single and Multi-stage Heat Pumps
- 2 Wire Hydronic Systems
- Hydronic Air Handlers
- Millivolt Systems

- 3 Wire Hydronic Systems
- Line Voltage Systems (Without Transformer)

Heat/Cool Terminals: RH, RC, O, B, W1, W2, Y1, Y2, G, E, C.
Electrical Ratings: 1-1/2 AMPS at each terminal, 2 AMPS total 24v AC. System or Battery Powered: 2 "AA" Batteries Included.
Temperature Control Range: 45°F to 90°F (7° to 32°). Accuracy: ±1°F over a range of 50°F to 95°F.

Environmental Limits:
Moisture and Dust: meets IP20.
Operating Humidity: 20% to 90% non-condensing.
Operating Temperature: +32°F to +95°F (+0°C to +35°C).
Storage Temperature: -4°F to +130°F (-20°C to +54°C).
Electrical Immunity: meets relevant CE specifications.


by PowerReviews
LuxPro PSD122E Non-Programmable Universal Thermostat

(based on 1 review)

Reviewed by 1 customer

Displaying review 1

Back to top

(1 of 2 customers found this review helpful)


Not bad,goodprice

By Don't have one

from Michigan

About Me Homeowner

Verified Buyer


  • Easy To Adjust
  • Easy To Install


  • Hard To Read Display
  • Read out

Best Uses

  • Homes

Comments about LuxPro PSD122E Non-Programmable Universal Thermostat:

Not bad for the price,However my unit requires an OEM Stat due to alarm relay read out not provided by lux.

Service and delivery comments:

Everything good.

Displaying review 1

Back to top