Honeywell H46E1013 Dehumidistat
About This Product
The H46E Humidity Controller is used with portable and central unit dehumidifiers, or for mildew control with air conditioning systems. The H46E has an spst, snap-acting switch designed for line voltage circuits. The H46C has two leadwires for switch box mounting. The H46E has an electric cord with an interrupter plug.
- Positive ON-OFF settings permit manual operation of controlled equipment.
- Impact-resistant, molded plastic cover mounts on wall.
- Fully enclosed, dust free, SPST, snap-acting switch.
- Sensing element of thin, moisture sensitive nylon ribbon provides reliable operation even when ambient temperature conditions change.
- Voltage: 120 Vac
- Voltage: 24 Vac
- Electrical Ratings: (120 Vac, Full Load) 7.5 A
- Electrical Ratings: (120 Vac, Locked Rotor) 30.0 A
- Electrical Ratings: (120 Vac, Resistive) 12.0 A
- Electrical Ratings: (240 Vac, Full Load) 3.8 A
- Electrical Ratings: (240 Vac, Locked Rotor) 15.0 A
- Electrical Ratings: (240 Vac, Resistive) 6.0 A
- Color: Beige
- Mounting: Wall mount
- Differential: 4% to 6% RH
- Temperature Range: (F) 50 F to 125 F
- Temperature Range: (C) 10 C to 52 C
- Operating Humidity Range (% RH): 20 to 80% RH
- Dimensions (in.): 4 11/16 in. high x 2 15/16 in. wide x 2 1/8 in. deep
- Dimensions (mm): 119 mm high x 75 mm wide x 54 mm deep
Reviewed by 1 customer
Displaying review 1
- Easy To Adjust
- Easy To Install
- Intuitive Controls
- Large Rooms
- Small Rooms
Comments about Honeywell H46E1013 Dehumidistat:
Used for basement installation for recovery dehumidifier w/o humidistat; it was recommended to me by the dehumidifier mfr. Only been in use 2 weeks and seems to be working fine.