Honeywell C7189U-1005 Indoor Sensor
About This Product
| MFG: | Honeywell |
| MFG#: | C7189U-1005 |
| Our#: | 109924 |
Benefits:
Allows thermostat to be placed in most convenient place for the homeowner - even if that place is not optimal for temperature reading
Allows sensing of temperature from remote areas - with control from thermostat location.
Fits the following VisionPro 8000 Model Thermostats:
TH8110U1003
TH8321U1006
TH8320U1008
TB8220U1003
TB7220U1012
NOTE: Thermostats can accept EITHER an indoor OR outdoor sensor - not both. Maximum distance between thermostat and sensor is 200 feet.
Operating Ambient Temperature Range:
45 to 88 F (7.2 to 32 C)
Display Range:
0 to 99 F (-18 to 37 C)
Sensor Accuracy:
+/- 1.5 F at 70 F (+/- .84 at 21 C)
Operating Relative Humidity:
5% to 95% non-condensing
Finish:
White
Dimensions in in. (mm):
1 1/2 (38) wide X 2 1/4 (57) high X 3/4 (19) deep
Related Products & Accessories
Customers most agreed on the following attributes:
[0 of 2 customers found this review helpful]
from Colorado on 1/25/2010Comments about Honeywell C7189U-1005 Indoor Sensor:
I installed this with my IAQ control. (YTH9421C1002). The thermostat averages the temperature between this thermometer and the one in the thermostat itself. Works great!
from Brooklyn, NY on 1/24/2010Comments about Honeywell C7189U-1005 Indoor Sensor:
I would buy this product again.
from St Louis MO on 1/19/2010Comments about Honeywell C7189U-1005 Indoor Sensor:
The remote temp sensor was easy to wire up (same thing as the "home base") Interestingly, it seems to be more accurate than the sensor in the thermostat itself because now the displayed "Room Temp" matches what I measure independently much better than it did before.
I purchased it because I just added a gas stove to my living room and as soon as that started to crank out the heat my furnace would no longer run since the thermostat was at the other end of the room. The living room stayed warm but the rooms away from that would not get enough heat. Net result of controlling the main furnace off the sensor in my bedroom and controlling the gas stove with the remote (wireless) sensor that came with the stove was great.
The only real hassle was running the wire from the thermostat to my bedroom. I have a finished basement and it was way too cold in the attic to mess around up there so I ran the wire as inconspicuously as possible through the house itself. When spring comes I'll re-route the wire through the attic.
If you have an unfinished basement or easy access to the attic then I would say this is a a great option. The only other option to consider would be a wireless system, but that would require also changing the thermostat itself, and I didn't feel like doing that.
from Kansas City on 12/22/2009Comments about Honeywell C7189U-1005 Indoor Sensor:
Nice product.
[5 of 5 customers found this review helpful]
from Washington, DC on 1/27/2009Comments about Honeywell C7189U-1005 Indoor Sensor:
Received exactly what I ordered, on-time and at the agreed price. Highly recommend this buyer.
Note: These sensors cannot be used in a pair of two. Honeywell site doesn't mention it but they must be used in a series of 1,4, 16, etc. Other than that little issue everything was correct -but that is on Honeywell not the reseller.
from North Bend, OR on 11/12/2008Comments about Honeywell C7189U-1005 Indoor Sensor:
Works like a charm!
from Franklin, TN on 7/23/2008Comments about Honeywell C7189U-1005 Indoor Sensor:
Great product
