Fantech FH 20 Dehumidistat

Fantech FH 20 Dehumidistat

This line-voltage dehmidistat can control a dehumidifier or an exhaust fan based on the moisture level in a room. This two-wire surface mount wall control allows the humidity setting to be adjusted from 20 to 80 percent relative humidity, with an 8 percent maximum relative humidity differential. It can be installed over its own electrical box.

* Maximum Load: 7.5 amp at 120 volts AC
* Input Power: 120 volts AC, 60 Hz
* Switch: Single Pole Single Throw
* Dimensions: 3.1" wide x 4.5" high x 1.2" deep