Braeburn Model 5400 Digital Programmable Thermostat with Humidification Control

Braeburn Model 5400 Digital Programmable Thermostat with Humidification Control

Universal Auto Changeover Up to 3 Heat / 2 Cool, with Humidification Control / Programmable or Non-Programmable

FEATURES:

. 7 Day, 5-2 Day Programming or Non-Programmable
. Dual Powered-Hardwired or Battery
. Two Outside Air Modes-Economizer and Time of Day
. Programmable Humidification and Dehumidification with Fan Speed Control
. Large Display with Bright Blue Backlight
. Simple Menu-Driven Programming
. Separate Installer and User Setup Modes
. Residential or Commercial Program Modes
. Programmable Independent Fan Control with Recirculation Feature
. Multi-Level Keypad Lockout
. Non-Volatile Memory to Maintain User Settings
. Remote Indoor / Outdoor Sensor Compatible
. Residual Cooling Fan Delay
. Filter, UV and Humidifier Pad Check Monitor
. Adaptive Recovery Mode (ARMT)
. Auxiliary Heat Fossil Fuel Programming Option
. 1st, 2nd and 3rd Stage Adjustable Temperature Differential
. ESD GuardT Electronic Circuitry
. Compressor Short Cycle Protection
. Compressor Power Outage Protection
. Separate Heating and Cooling Program Set Point Times and Temperatures
. Temporary Program Override up to 4 Hours or Until Next Set Point
. Programmable Extended Hold Mode
. Programmable AC Monitoring
. Installer Clear Button and Front Access Reset Button
. Heat Pump Fault Detection
. Gas or Electric Fan Control
. Easy Access Front Battery Door
. Meets ENERGY STARŪ and California Title 24 Guidelines


SPECIFICATIONS:

Dimensions: 4.63" x 5.00" x 1.20"
Electric Rating: 24 Volt AC (18-30 Volt AC)
1 amp maximum load per terminal
6 amp total maximum load (all terminals)
AC Power: 18-30 Volt AC
DC Power: 3.0 Volts DC
(2 "AA" Alkaline batteries included)
Compatibility: Single stage or Multi-stage heat / cool systems including heat pumps with up to three stages of heating and two stages of cooling
250mv - 750mv millivolt heating systems
Control Range: 45° to 90° F (7° to 32° C)
Display Range: 40° to 99° F (5° to 37° C)
Accuracy: +/- 1° F (+/- .5° C)
Temperature Differential: 1st Stage - .5°, 1°, or 2° F (.25°, .5°, or 1° C)
2nd and 3rd Stage - 1°, 2°, 3°, 4°, 5°, or 6° F
(.5°, 1°, 1.5°, 2°, 2.5°, or 3° C)
Storage Temperature: 14° to 140° F (-10° to 60° C)
Operating Humidity: 5% to 95% Relative Humidity
Terminations: A/D, H, G, Rc, Rh, W2, B, O, Y1, Y2, W1/E/W3, C, L, S1, S2