> Products > Thermostat Brands > Braeburn Thermostats > Braeburn Multi-Stage / Heat Pump Thermostats > Braeburn Model 5320 Heat Pump/Multistage Touchscreen Programmable Thermostat

Braeburn Model 5320 Heat Pump/Multistage Touchscreen Programmable Thermostat

Braeburn Model 5320 Heat Pump/Multistage Touchscreen Programmable Thermostat

About This Thermostat

MFG: Braeburn
MFG#: 5320
Our#: 177189
Programmable: Yes (7 Day, 5+2, or Non-Programmable)
Stages: 4H & 2C
System Compatibility: Single Stage, Millivolt, Heat Pump, Multi-Stage
Power Options: 24 VAC Hardwire, Battery
Heat/Cool Changeover: Automatic or Manual
Programmable Fan: Yes
Temperature Limits: Yes
Keypad Lockout: Yes
Backlight: Yes
Vacation Hold: Yes

Braeburn Model 5320 Heat Pump/Multistage Touchscreen Programmable Thermostat

Replaces old model 5300

The universal auto changeover thermostat shall be a Braeburn model number 5320, 3.94" high x 5.56" wide x 1.19" deep, powered with either 24 Volt AC or with two "AA" Alkaline batteries (3.0 Volt DC). In the event of a power failure, the unit shall retain clock settings and universal 7 or 5-2 day or non-programmable settings. The thermostat shall be compatible with low voltage single stage or multi-stage gas, oil, or electric conventional heating or cooling systems with up to three stages of heating and two stages of cooling, heat pump systems with up to four stages of heating and two stages of cooling and 250mv - 750mv millivolt heating only systems. The thermostat shall have a bright blue backlight display, touchscreen with SpeedBar®, separate sub-base and multi-level keypad lockout. Temperature control range shall be between 45° and 90° F (7° and 32° C), accuracy of +/- 1° F (+/- .5° C). Operating humidity range between 5% and 95% relative humidity. The thermostat shall include separate installer and user setup modes, residential or commercial setup modes, permanent non-volatile memory to retain user settings, Filter, UV and humidifier pad check monitor, adaptive recovery mode (ARM), programmable independent fan control, residual cooling fan delay, indoor or outdoor remote sensor capability, auxiliary heat fossil fuel programming, and compressor power outage protection. A front reset button will return user settings to default values when pressed. This thermostat shall meet California Title 24 Guidelines.

. 7 Day, 5-2 Day or Non-Programmable
. Large 6.5 square inch easy-read touchscreen 
. Auto or Manual Changeover
. Bright Blue Backlit Display
. Exclusive Speedbar Technology
. Adjustable Temperature Limits
. Indoor or Outdoor Sensing 
. Speedset Programming Mode
. User Selectable Service Monitors 
. Separate User and Installer Reset Buttons 
. Hardwire OR Battery Power
. Multi-Level Keypad Lockout
. Circulating Fan Mode
. Residential and Commercial modes
. Meets California Title 24 Guidelines


Dimensions: 3.94" x 5.56" x 1.19"
Electric Rating: 24 Volt AC (18-30 Volt AC)
1 amp maximum load per terminal
3 amp total maximum load (all terminals)
AC Power: 18-30 Volt AC
DC Power: 3.0 Volts DC
(2 "AA" Alkaline batteries included)
Compatibility: Heat pump systems up to 4 heat/2 cool, Conventional systems up to 3 heat/2 cool, 250mv - 750mv millivolt heating systems
Control Range: 45° to 90° F (7° to 32° C)
Display Range: 40° to 99° F (5° to 37° C)
Accuracy: +/- 1° F (+/- .5° C)
Temperature Differential: .5°, 1°, or 2° F (.25°, .5°, or 1° C)
Storage Temperature: 14° to 140° F (-10° to 60° C)
Operating Humidity: 5% to 95% Relative Humidity
Terminations: Rc, Rh, W1/E/AUX1, W2/AUX2, Y1, Y2, G, W3/O/B, C, L, S1, S2