ProThermostats.com > Products > Thermostat Brands > Braeburn Thermostats > Braeburn Non-Programmable Thermostats > Braeburn Model 3220 Multistage Non-Programmable Thermostat

Braeburn Model 3220 Multistage Non-Programmable Thermostat

Braeburn Model 3220 Multistage Non-Programmable Thermostat

About This Thermostat

MFG: Braeburn
MFG#: 3220
Our#: 177357
Programmable: No
Stages: 3H & 2C
System Compatibility: Multi-Stage, Millivolt, Heat Pump
Power Options: Battery, 24 VAC Hardwire
Heat/Cool Changeover: Automatic or Manual
Programmable Fan: No
Temperature Limits: Yes
Keypad Lockout: Yes
Backlight: Yes
Vacation Hold: No

Braeburn Model 3220 Multistage Non-Programmable Thermostat

The digital non-programmable thermostat with auto changeover shall be a BraeburnŽ model number 3220, 3.80" high x 5.11" wide x 1.42" deep, powered with either 24 Volt AC or with two "AA" Alkaline batteries (3.0 Volt DC). In the event of a power failure, the unit shall retain all user, installer and temperature settings. The thermostat shall be compatible with low voltage single stage or multi-stage gas, oil, or electric conventional heating or cooling systems with up to two stages of heating and two stages of cooling, and heat pump systems with up to three stages of heating and two stages of cooling. Also compatible with 250mv - 750mv millivolt heating only systems and 2 or 3 wire hydronic zone systems. The thermostat shall have a bright blue backlight display, SpeedBarŽ
, separate sub-base and multi-level keypad lockout. Temperature control range shall be between 45° and 90° F (7° and 32° C), accuracy of +/- 1° F (+/- .5° C). Operating humidity range between 5% and 95% relative humidity. The thermostat shall include separate installer and user setup modes, permanent non-volatile memory to retain user settings, fillter, UV and humidifier pad check  monitor, residual cooling fan delay, indoor or outdoor remote sensor capability, auxiliary heat fossil fuel programming, and compressor power outage protection. A front reset button will return user settings to default values when pressed.

FEATURES:

. Large 4 Sq. In. Display with Bright Blue Backlight
. Auto or Manual Changeover
. SpeedBar  Multi-Function Button
. Adjustable Temperature Limits
. Indoor or Outdoor Remote Sensing
. Permanent Memory Retains Settings
. Separate User and Installer Reset Buttons
. User Selectable Service Monitors
. Hardwire or Battery Powered
. Multi-Level Keypad Lockout
. Set Point Adjustment Limits
. Auxiliary Heat Fossil Fuel Option
. Compressor Short Cycle Protection
. Compatible with 2 or 3 Wire Hydronic Zone Systems

SPECIFICATIONS:

Dimensions: 3.86" x 5.11" x 1.42"
Electric Rating: 24 Volt AC (18-30 Volt AC)
1 amp maximum load per terminal
3 amp total maximum load (all terminals)
AC Power: 18-30 Volt AC
DC Power: 3.0 Volts DC
(2 "AA" Alkaline batteries included)
Compatibility: Single stage gas, oil or electric systems
Heat pump systems up to 3 heat/2 cool,
Conventional systems up to 2 heat/2 cool
250mv - 750mv millivolt heating systems
Control Range: 45° to 90° F (7° to 32° C)
Display Range: 40° to 99° F (5° to 37° C)
Accuracy: +/- 1° F (+/- .5° C)
Temperature
Differential: .5°, 1°, or 2° F (0.2°, 0.5°, or 1° C)
Storage Temperature: 14° to 140° F (-10° to 60° C)
Operating Humidity: 5% to 95% Relative Humidity
Terminations: G, Rc, Rh, W2, O/B/V3, Y1, Y2, W1/E/W3, C, L, S1, S2

ProThermostats.com Price:

$71.95

In Stock

Quantity

Shipping Details
  • Standard: 2-7 Business Days: Free!
Shipping fees listed are for a quantity of (1)