(based on 1 rating)

Features: -Auto Changeover, 2-Stage Heat/Cool for use with gas/electric, electric and hydronic heat -Dual-Setpoint with adjustable deadband, setpoint adjustment range from 35° - 99°F, switchable to °C -7 Day Programmable with up to 4 Time Periods per day, with copy command for easy programming -3 Security Levels with setpoint limiting, mode operation locking and setpoint locking -4 Hour Setback Override Timer adjustable in 30 min. increments -Soft Start - up to 100 units can be started in sequence form a single remote contact closure with no two units starting up simultaneously - up to 50% of the units can be programmed to start outside a 15 minute window for limiting demand -Pre-Occupancy Purge - fan runs before programmed occupancy time, adjustable 0 to 3 hours -Energy Saving Smart Fan - With the fan on continuously, fan runs only in occupied periods or when the system calls for heating or cooling in unoccupied periods -Thermostat Locking - Setpoints can only be adjusted by authorized individuals if this feature is on -Thermoglow Continuously Lit Electro-luminous Display -Maintains temperature to within 1° of set point -No batteries required, stat retains correct time for up to 48 hours in case of power failure -All programming and setpoints stored in non- volatile memory, and are never lost in power failure -Service filter indicator (adjustable 0 to 1950 hours) -Red/Green LED shows whether thermostat is calling for Heating or Cooling -5 minute compressor time guard and adjustable cycle limit, both overrideable for servicing equipment -On board dry contact closure available to force stat into occupied operation -Optional tamper-proof remote room sensor with push-button override available -Optional wireless remote room sensor, can average up to 16 sensors available -Optional duct sensor available