(based on 1 rating)

NO LONGER AVAILABLE ! Automatic humidity control with Humidicalc+. Mounts in duct and provides auto low voltage electronic control of humidifiers in central heating systems. Designed to auto adjust humidity levels. Color taupe. Features: Patented Honeywell HumidiCalc+T Software eliminates need for an outdoor sensor on the most common single-stage, gas or oil forced-air equipment. Combination temperature and humidity sensor accurately determines the dewpoint at the control location. With the use of the C7089H Outdoor Temperature Sensor, the H1008 also provides automatic humidity control in heat pump applications. Automatically adjusts humidity level based on the frost factor set by the homeowner. System status light indicates normal operation, test mode and fault indication. Specifications: Description Dew point control of humidification equipment. Application Humidification Voltage 24 Vac Electrical Ratings (120 Vac, Full Load) 2.0 A at 24 Vac, Humidifier Contacts Electrical Ratings (120 Vac, Locked Rotor) 10.0 A at 24 Vac, Humidifier Contacts Electrical Ratings (120 Vac, Resistive) 2.0 A at 24 Vac, Humidifier Contacts Color Taupe Mounting Duct mount Differential ± 2.5 F Differential ±1.4 C Temperature Range (F) 45 F to 88 F Temperature Range (C) 7 C to 31 C Operating Humidity Range (% RH) 95% RH at 95 F, non-condensing Dimensions (in.) 4 7/32 in. high x 5 1/4 in. wide x 1 31/32 in. deep Dimensions (mm) 107 mm high x 133 mm wide x 50 mm deep Includes HumidiCalc Automatic Humidity control for humidification applications. Used With C7089H (optional)