Buy the White-Rodgers 1G66-641 Line Voltage Bimetal Heat Only Thermostat on http://prothermostats.com Print This PagePrint This Page
White-Rodgers 1G66-641 Line Voltage Bimetal Heat Only Thermostat image
 
(based on 5 ratings)
Read All Reviews
Brand: White-Rodgers
Located in: Electric Baseboard & Line Voltage
The Type 1G66 Electric Heat Thermostat is designed for use on all types of electrical heating installations such as cable heat, baseboards, wall insert heaters, etc. The Type 1G66 thermostat is intended for use on 240 or 277 VAC where local codes require that a double line disconnect thermostat be used. This thermostat can also be used on 120 VAC. (See specific wiring information for 120 VAC.) Dial Setting: This thermostat may be set anywhere between 40° and 80°F by simply turning the knob so the indicator on knob points to the desired setting. The knob may be turned past 40° to the "OFF" position to obtain temporary shutdown of the heating equipment for short periods of time such as on weekends, vacation, etc. Turning knob to "OFF" position will break both sides of line. NOTE: Only one side of line is broken during normal cycling of this thermostat. SPECIFICATIONS: Switch Rating: Non-Inductive 22A (5000W) 240VAC 19A (5000W) 277VAC 22A (2500W) 120VAC Temperature Range: 40° to 80°F Differential: 3.0°F Switch Action: Open on rise Contact Structure: Double Line Disconnect - DPST Dimensions: 4 13/16" H x 3 5/16" W x 1 7/16" D
More information for the White-Rodgers 1G66-641 Line Voltage Bimetal Heat Only Thermostat
Review Snapshot®
Avg. Customer Rating:
 
4.2 stars
(based on 5 reviews)
100% of respondents would recommend this to a friend.

Customers most agreed on the following attributes:

Pros:
Easy to install(3), Simple controls(3)
Best Uses:
Home(3)
Describe Yourself:
Homeowner(3)
 
Bought to control hi-amp contactors.
By Chapel PrezVerified Purchaser from Sandpoint, ID on 4/26/2011
Bottom Line:
Yes, I would recommend this to a friend

Comments about White-Rodgers White-Rodgers 1G66-641 Line Voltage Bimetal Heat Only Thermostat:

Not installed yet! Bought to contol high wattage radiant heaters via a magnetic contactor. Should work great. [...]

 
great, but be sure it's for you
By jonVerified Purchaser from denver, co on 2/8/2011
Best Uses:
Homes
Describe Yourself:
Homeowner
Bottom Line:

Comments about White-Rodgers White-Rodgers 1G66-641 Line Voltage Bimetal Heat Only Thermostat:

This is an spst switch. Used with 220v, it interrupts only one line - you must cut power to it in order to service heater. No manual off position. I use these with a sticker attached "cut power at breaker to service"

 
Good [...] product
By HARRY THE HATVerified Purchaser from TAMPA FLORIDA on 1/19/2011
Pros:
Easy To Adjust, Easy To Install, Precise Controls
Best Uses:
GREAT IN MY PARK MODEL, Homes, Large Rooms, Small Rooms
Describe Yourself:
Handyman, Homeowner
Bottom Line:

Comments about White-Rodgers White-Rodgers 1G66-641 Line Voltage Bimetal Heat Only Thermostat:

PRODUCT WAS EXACTLY WHAT I WANTED AND IT WAS EASY TOO INSTALL EVEN FOR NON ELECTRICIAN. [...]

[1 of 1 customers found this review helpful]

 
works
By mylesVerified Purchaser from egg harbor wi on 12/15/2009
Pros:
Easy To Install, Intuitive Controls, Precise Controls
Best Uses:
Homes
Describe Yourself:
Professional
Bottom Line:

Comments about White-Rodgers White-Rodgers 1G66-641 Line Voltage Bimetal Heat Only Thermostat:

none

[4 of 5 customers found this review helpful]

 
GREAT PRODUCT, WORKS GREAT
By LOUIEBIRDVerified Purchaser from FORT PAYNE, ALABAMA on 4/2/2009
Pros:
Easy To Adjust, Easy To Install, Precise Controls
Best Uses:
GREENHOUSE
Describe Yourself:
Homeowner
Bottom Line:

Comments about White-Rodgers White-Rodgers 1G66-641 Line Voltage Bimetal Heat Only Thermostat:

I USED THE CONTROL FOR MY GREENHOUSE 1000WT HEAT CONTROL.
iT SET AND HOLD A CONSTANT 70DG. TEMP.

Customer Reviews about the White-Rodgers 1G66-641 Line Voltage Bimetal Heat Only Thermostat at prothermostats.com
Powered by PowerReviews
Copyright © 2011 prothermostats.com All Rights Reserved. Do not republish contents.