(based on 1 rating)

LuxPro PSP711CC Thermostat - Single Stage Heat/Cool, Programmable The PSP711CC can be used with most single stage 24 volt gas, oil or electric heating and air conditioning systems, single stage heat pumps, or gas millivolt heating systems. It cannot be used with 3 wire zone valves, 120 volt heating systems, or multi stage heat pumps. Features: - Small elegant design - Exclusive LUX Speed Dial® - EL Illuminated Display - Comprehensive Graphical Filter Monitor - 7 Day Programming - Energy Star Compliant - 4 Periods Per Day - Independent Fan Program - Programmable (minimum) Fan Duty Cycle - Nonvolatile Memory For All Programs And Settings - Temporary Temperature Override - Temperature Hold - Keyboard Lockout - F/C Temperature Display - 12/24 Hr Clock Display - Adjustable Temperature Differential / Cycle Rate - User Temperature Offset / Calibration - 5/2 minute selectable minimum Run/Off time provides short cycle and compressor protection COMPATIBLE WITH: - Low Voltage (24 Volt) Systems - Single Stage Heat Pumps without auxilary heat/emergency heat - High Efficiency Systems - Millivolt Systems (Wall Furnace) - 1 Heat/1 Cool Heating and Air Conditioning Systems, Gas, Oil or Electric Heating Systems NOT COMPATIBLE WITH: - 2 Stage Heat Pump Systems - 3 Wire Hot Water Systems - 120/240 Line Voltage System Specifications Heat/Cool Terminals: RH, RC, O, B, W, Y, G. Electrical Ratings: 11/2 AMPS at each terminal, 2 AMPS total 24v AC. System or Battery Powered: 2 "AA" Batteries . Temperature Control Range: 45°F to 90°F (7° to 32°). Accuracy: ±1°F over a range of 50°F to 95°F. Environmental Limits: Moisture and Dust: meets IP20. Operating Humidity: 20% to 90% non-condensing. Operating Temperature: +32°F to +95°F (+0°C to +35°C). Storage Temperature: -4°F to +130°F (-20°C to +54°C). Electrical Immunity: meets relevant CE specifications.